北風心情

檔案名稱：工程圖.dtl

分隔線以下全部複製貼上到純文字檔

==========分隔線=========

drawing_text_height 3.5
text_thickness 0.000000
text_width_factor 0.85
broken_view_offset 5
create_area_unfold_segmented YES
def_view_text_height 3.5
def_view_text_thickness 0.000000
default_view_label_placement BOTTOM_LEFT
detail_circle_line_style phantomfont
detail_circle_note_text DEFAULT
detail_view_boundary_type CIRCLE
detail_view_circle ON
detail_view_scale_factor 2.000000
half_view_line symmetry
model_display_for_new_views FOLLOW_ENVIRONMENT
projection_type THIRD_ANGLE
show_total_unfold_seam YES
tan_edge_display_for_new_views DEFAULT
view_note STD_ANSI
view_scale_denominator 1
view_scale_format DECIMAL
crossec_arrow_length 5
crossec_arrow_style head_online
crossec_arrow_width 2
crossec_text_place above_tail
crossec_type OLD_STYLE
cutting_line std_iso
cutting_line_adapt NO
cutting_line_segment 6
def_xhatch_break_around_text NO
def_xhatch_break_margin_size 0.150000
default_show_2d_section_xhatch ASSEMBLY_AND_PART
default_show_3d_section_xhatch YES
draw_cosms_in_area_xsec NO
remove_cosms_from_xsecs TOTAL
show_quilts_in_total_xsecs NO
datum_point_shape CROSS
datum_point_size 8
hidden_tangent_edges DEFAULT
hlr_for_datum_curves YES
hlr_for_pipe_solid_cl NO
hlr_for_threads YES
location_radius DEFAULT(2.)
mesh_surface_lines off
pipe_insulation_solid_xsec NO
ref_des_display NO
show_sym_of_suppressed_weld NO
thread_standard std_iso
weld_light_xsec NO
weld_solid_xsec NO
allow_3d_dimensions yes
angdim_text_orientation HORIZONTAL
associative_dimensioning YES
chamfer_45deg_leader_style std_iso
chamfer_45deg_dim_text JIS
clip_diam_dimensions YES
clip_dimensions YES
clip_dim_arrow_style none
default_dim_elbows YES
dim_fraction_format DEFAULT
dim_leader_length 5
dim_text_gap 1.3
dim_trail_zero_max_places same_as_dim
draft_scale 1.000000
draw_ang_units ANG_DEG
draw_ang_unit_trail_zeros YES
dual_digits_diff 1
dual_dimensioning NO
dual_dimension_brackets YES
dual_metric_dim_show_fractions NO
dual_secondary_units inch
iso_ordinate_delta yes
lead_trail_zeros std_metric
lead_trail_zeros_scope DIMS
orddim_text_orientation PARALLEL
ord_dim_standard std_iso
parallel_dim_placement ABOVE
radial_dimension_display STD_ASME
shrinkage_value_display PERCENT_SHRINK
text_orientation parallel_diam_horiz
use_major_units NO
witness_line_delta 1.5
witness_line_offset 1
default_font font
dim_dot_box_style DEFAULT
draw_arrow_length 3.5
draw_arrow_style filled
draw_arrow_width 1.5
draw_attach_sym_height DEFAULT
draw_attach_sym_width DEFAULT
draw_dot_diameter 1
leader_elbow_length 6
leader_extension_font SOLIDFONT
set_datum_leader_length 0.375000
axis_interior_clipping NO
axis_line_offset 5
circle_axis_offset 4
radial_pattern_axis_circle yes
asme_dtm_on_dia_dim_gtol ON_GTOL
gtol_datum_placement_default ON_BOTTOM
gtol_datums STD_ANSI
gtol_dim_placement ON_BOTTOM
gtol_display_style STD
gtol_lead_trail_zeros SAME_AS_LEAD_TRAIL_ZEROS
new_iso_set_datums YES
set_datum_triangle_display FILLED
stacked_gtol_align YES
2d_region_columns_fit_text NO
all_holes_in_hole_table YES
dash_supp_dims_in_region YES
def_bom_balloons_attachment EDGE
def_bom_balloons_snap_lines NO
def_bom_balloons_stagger NO
def_bom_balloons_stagger_value 0.600000
def_bom_balloons_view_offset 0.800000
def_bom_balloons_edge_att_sym ARROWHEAD
def_bom_balloons_surf_att_sym INTEGRAL
min_dist_between_bom_balloons 0.800000
model_digits_in_region YES
reference_bom_balloon_text "DEFAULT"
show_cbl_term_in_region YES
show_dim_sign_in_tables YES
sort_method_in_region DELIMITED
zero_quantity_cell_format EMPTY
draw_layer_overrides_model NO
ignore_model_layer_status YES
model_grid_balloon_display YES
model_grid_balloon_size 0.200000
model_grid_neg_prefix -
model_grid_num_dig_display 0
model_grid_offset DEFAULT
model_grid_text_orientation HORIZONTAL
model_grid_text_position CENTERED
pipe_pt_line_style DEFAULT
pipe_pt_shape CROSS
pipe_pt_size DEFAULT
show_pipe_theor_cl_pts BEND_CL
blank_zero_tolerance NO
display_tol_by_1000 NO
symmetric_tol_display_standard STD_ASME
tol_display NO
tol_text_height_factor STANDARD
tol_text_width_factor STANDARD
decimal_marker COMMA_FOR_METRIC_DUAL
default_pipe_bend_note NO
drawing_units mm
harn_tang_line_display NO
line_style_standard STD_ANSI
max_balloon_radius 0.000000
min_balloon_radius 0.000000
node_radius DEFAULT
pos_loc_format %s%x%y, %r
sym_flip_rotated_text NO
weld_symbol_standard STD_ANSI
yes_no_parameter_display TRUE_FALSE